| IMPCO
Test Tools Sequent
Software | Spectrum Software
Sequent Installation Tool Kit
Part Number 90AV99004048
Software Installation Kit
Part Number 90AV99002037
USB To Serial (RS232) Adapter
Part Number 90AV99002030
Calibration Kit
Part Number 09SQ20990001
Download the latest
Sequent Display Software
Before installing the Sequent
software, please be sure your computer meets the minimum system
requirements.
Supported operating systems
are:
 |
Windows XP |
|
Windows 2000 |
|
Windows 98 SE |
Minimum processor speed:
Pentium II 350
Minimum RAM requirement: 64 MB
Minimum hard disk space: 1 GB
Minimum display resolution:
1024x768
*Requires an available serial
or USB port
Part Number ITK-4
The ITK-4 Test Kit is designed
to replace both the ITK-2 and ITK-3 test kits and can be used on both
Spectrum Series II and Spectrum Series III certified fuel systems. The ITK-4
uses the new ECOM cable that supports both serial and CAN communications
with the Spectrum ECM. The new ECOM cable supports USB PC connections.
Download the latest DST software and ECOM drivers below.
*ECOM cable supports USB port
only.
Download the latest
Spectrum DST software
Before installing the DST
software, please be sure your computer meets the minimum system
requirements.
Supported operating systems
are:
|
Windows Vista |
|
Windows XP |
|
Windows 2000 |
Minimum processor speed:
|
Pentium II 450 MHz |
|
Pentium III 1.0 GHz for
Windows Vista |
Minimum RAM requirement:
|
Windows Vista 512 MB |
|
Windows XP 256 MB |
|
Windows 2000 128 MB |
* At least one available RS232
serial or USB port.
* ECOM cable supports USB port
only.
Part Number ITK-1
Download the
ITK-1 Instruction Sheet
The ITK-1 test kit is designed for all IMPCO
standard non certified mechanical fuel systems.
Part Number FSA-1000
The FSA 1000 is used to monitor and adjust
the fuel mixtures on standard non certified type closed loop engine control
systems.
|
Test Tools
